Tengen 337006 or RAMBO-1: 40-pin 0.6" PDIP (Canonically mapper 64)
.--\/--. (n) M2 -> |01 40| -- +5V (r) PRG A16 <- |02 39| -> PRG A17 (r) (r) PRG A15 <- |03 38| <- CPU A13 (n) (r) PRG A13 <- |04 37| -> PRG A14 (r) (r) PRG /CE <- |05 36| <- CPU A14 (n) (rn) CPU D6 -> |06 35| <- CPU D7 (rn) (rn) CPU A0 -> |07 34| <- CPU D5 (rn) (rn) CPU D4 -> |08 33| <- CPU D0 (rn) (rn) CPU D2 -> |09 32| <- CPU D1 (rn) (n) R/W -> |10 31| <- CPU D3 (rn) (n) /ROMSEL -> |11 30| -> /IRQ (n) (r) CHR A10 <- |12 29| -> CIRAM A10 (n) (n) PPU A10 -> |13 28| -> CHR A11 (r) (n) PPU A12 -> |14 27| <- PPU A11 (n) (n) CIC toPak -> |15 26| -> CHR A13 (r) (n) CIC toMB <- |16 25| -> CHR A12 (r) (n) CIC +RST -> |17 24| -> CHR A14 (r) (n) CIC CLK -> |18 23| -> CHR A15 (r) GND ?? |19 22| -> CHR A17 (r) GND -- |20 21| -> CHR A16 (r) '------'
Variant pinout for iNES Mapper 158:
(n) /ROMSEL -> |11 30| -> /IRQ (n) (r) CHR A10 <- |12 29| -> n/c (n) PPU A10 -> |13 28| -> CHR A11 (r) (n) PPU A12 -> |14 27| <- PPU A11 (n) (n) CIC toPak -> |15 26| -> CHR A13 (r) (n) CIC toMB <- |16 25| -> CHR A12 (r) (n) CIC +RST -> |17 24| -> CHR A14 (r) (n) CIC CLK -> |18 23| -> CHR A15 (r) GND ?? |19 22| -> CIRAM A10 (n) GND -- |20 21| -> CHR A16 (r) '------'
On the PCB 800032, there are seven jumpers:
Exactly one of R1 and R2 should be populated.
If R4 is populated, the 74'32 should be populated. Exactly one of R3 and R4 should be populated. Exactly one of R5 and the 74'32 should be populated.
Additionally, there are two cut & solder jumpers:
Source:
Categories: Pinouts